S14 Chassis Harness

S14 Chassis Harness!! Available in S14 Zenki or Kouki options.

Chassis Harness has the plug and play harness you’re looking for! With all brand new Nissan connectors, Terminals, and TXL wire. The harness is built in three easy to install sections. The front, the main, and the rear.

– Blinkers utilize the OEM Nissan blinker / head light switch on the steering column. Or switch panel
– Left, right, and 3rd brake light. Plugs into your OEM S14 brake pedal
– Reverse lights, left as a flying lead. Send 13.8v (+) power to this wire. To activate the reverse lights
– OEM fuel pump housing connectors
– Fully functional tumbler, using your OEM key. or switch panel

When you remove your old factory harness, do not throw it away, JUST YET!!

Ditch the problematic OEM body harness, for our brand new basic functions Chassis Harness. Our S14 Chassis Harness, powering up all the important basic functions. Powered by a built-in fuse block! We can wire in any 240sx S14 or S15 front end you’d like!

Switch panel options are also available.

This is a basic function Chassis Harness. This product is NOT a full OEM replacement. We power up the important functions, listed below.

– Side bumper lights
– Front bumper lights
– Corner lights
– Blinker lights
– Head lights
– High beams
– L.E.D blinker relay
– Tumbler
– Brake pedal
– Fuel pump connector. 2 pin for the oem fuel pump housing.We will ask if you have a 3 or 4 pin fuel level connector.
– License plate lights. Or wire in a 6″ L.E.D light
– 3rd brake light. Or left as flying leads, let us know what length
– Tail lights. Zenki or Kouki
-Reverse lights
ALL PLUG AND PLAY!!!!! With additional inputs, and outputs located in the passenger side kick area for – battery constant, ignition on, running lights, and reverse. With additional options available.

For a additional fee, we can can also wire in
– Wipers. This functions off a rocker switch. The wiper will not park on its own.
– 2 electric windows
– An extra relay. Depending on your build requirements.

We do not wire the engine harness, A.C, radio, speakers, sunroof, fans, oem cluster, heater, defrost, cruise control, or power locks. This is a basic function harness.

We can how ever leave a 12g flying lead(s). Receiving power from either ignition on, or a switch (depending on your build requirements) To activate extra circuits. For example, you could use it to power up a radio, or cig lighter, radar, after market heater box, underglow, ect. We only supply the power. (NOT TO BE USED FOR FANS. Will void warranty)

*Due to OEM battery placement. You will be required to source a battery junction block, or mount. This will be installed inside the cabin, in the passenger foot area.

Out of Country sales. Email us.

For Tefzel wire with Reychem loom options. Contact us for specific pricing.

The turn around time is about 3 – 6 weeks. From the time your payment is processed, until we begin building your custom Chassis Harness. Subject to change, without notice.

A refund can be issued, up until we begin building your custom Chassis Harness. S14 Chassis Harness refunds, is subject to a 15% processing fee. Of the retail value.

Email us as Sales@chassisharness.com if you have any questions. Or if you would like us to send you our S14 Chassis Harness Questionnaire